Welcome, Guest [ Sign In ] | Badge Holders - 20 results (1-15 displayed)  H743 - 8.5" x 4" Vertical Badge Holder with 3.75" x 2.5" and 3.75" x 7.7" InsertsClear vinyl vertical holder with two insert slots. The top pocket is for a 3.75" x 2.5" insert (H3122) and the bottom is for a 3.75" x 7.7" insert (H3050 closest fit). CLOSEOUT! ALL SALES FINAL!Click Here for More Info  Bags of 100 $25.90 (20+ bags)  H200C - 3" x 4" Vinyl Holder w/ Bulldog ClipThis product is being sold at a low price because our inspection found that a few clips in these cases would pop off. BUT ONLY A FEW! In fact, it is likely you will get a box where none pop off. This product sells on our retail site for $230 for 1000. We are sacrificing these for $160. CLOSEOUT! ALL SALES FINAL.Click Here for More Info Case of 1000 $160.00 (1+ cases)  H403 - CR-80 / Business Card Holder w/ 1/2" ExtensionThe H403 is a business-card (H922) sized holder featuring a 1/2" extension (H917) for categorization purposes. The holder comes with a pin/clip combo fastener. CLOSEOUT! ALL SALES FINAL.Click Here for More Info Box of 100 $35.70 (20+ boxes)  H402 - Business Card Holder with Protective FlapThe H402 is a vinyl business card holder with a protective flap. Made to fit a 2.3" x 3.5" insert (H922). CLOSEOUT!!! LIMITED SUPPLY. ALL SALES FINAL.Click Here for More Info Bags of 100 $15.04 (20+ bags)  H208X - 3" X 3.875" Badge Holder with Pin/Clip ComboThe H208X is made of clear vinyl and comes with an attached pin/clip combo. This is a closeout holder, some holders may be wrinkled. CLOSEOUT! ALL SALES FINAL.Click Here for More Info Box of 100 $19.30 (20+ boxes)  H101L - 2" x 3.5" Plastic Badge Holder w/Elastic CordThe H101L badge holders are made from acetate plastic and come with a standard elastic cord attached. They are approximately 2.25" tall and 3.5" wide. The holders fit perfectly with a 2" by 3.5" business card-sized insert, loaded from either side of the badge holder. You might try our H922 or H3122 inserts for the best fit.Click Here for More Info Box of 100 $23.80 (20+ boxes)  H330 - Business Card Holder w/ ExtensionBusiness card holder with a special extension pocket. Designed to hold a standard business card insert (H922) and an extension insert (H917). CLOSEOUT! ALL SALES FINAL.Click Here for More Info Box of 100 $19.65 (20+ boxes)  H114V - 3.75" x 2.75" Magnetized HolderBlack badge holder with clear front and magnetized flap that can be clasped on a pocket or belt. CLOSEOUT!!! LIMITED SUPPLY. ALL SALES FINAL.Click Here for More Info Box of 25 $48.43 (10+ boxes)  H101C - 2.25" x 3.5" Acetate Badge Holder w/ClipThe H101C is a durable acetate (plastic) badge holder. They are approximately 2.25" tall and 3.5" wide, and made to fit a 2" x 3.5" business card-sized insert perfectly. The inserts are loaded into the holder from the top. Try our H922 or the H3122 for the best fitting insets.Click Here for More Info Box of 100 $22.75 (20+ boxes)  H113H - 2" x 3" Magnetized HolderBlack badge holder with clear front and magnetized flap that can be clasped on a pocket or belt. LIMITED SUPPLY! ALL SALES FINAL!Click Here for More Info Box of 25 $27.60 (20+ boxes)  H113V - 3" x 2" Magnetized HolderBlack badge holder with clear front and magnetized flap that can be clasped on a pocket or belt. CLOSEOUT! ALL SALES FINAL.Click Here for More Info Box of 25 $39.77 (20+ boxes)  H121C - 3" x 4" Red Tinted Holder w/ Bulldog ClipA red tinted vinyl badge holder with bulldog clip. Made to fit the H900 insert. Top Loading with holes on top for optional neckcord (HCORD). CLOSEOUT!!! Limited Supply. ALL SALES FINAL.Click Here for More Info Box of 100 $34.01 (20+ boxes)  H150 - 3.75" x 4" Color Top HolderThis distinctive holder allows you to catagorize your event by a color bar across the top of the badge holder. CLOSEOUT!!! LIMITED SUPPLY! ALL SALES FINAL!Click Here for More Info Box of 100 $16.45 (20+ boxes)  H228 - 3" x 4" Vinyl Holder w/ 5/8" Imprinted BarThe H228 is a 3" x 4" vinyl badge holder featuring a printed 5/8" color bar. Made to fit a top-loading (H900) 3" x 4" insert. Also features holes for an optional (HCORD) elastic cord. CLOSEOUT!!! LIMITED SUPPLY. ALL SALES FINAL.Click Here for More Info Box of 100 $25.08 (20+ boxes)  H261 - 3" x 4" Holder w/Imprinted Extension BarThe H261 is a 3" x 4" vinyl badge holder with an extension featuring a category title at the bottom. Holes exist for an optional HCORD elastic neck cord. Quantities are limited.cord(HCORD) or a strap clip (F19). CLOSEOUT!!! LIMITED SUPPLY. ALL SALES FINAL.Click Here for More Info Box of 100 $25.34 (20+ boxes) NEXT > | Chat Live with a representative!  Give us a call! 512.357.2261  Save big on our deals!  Request a Sample |
Home
My Account
View Cart
Help/FAQs
Home
My Account
View Cart
Help/FAQs
Orientation
Fastener
Closeout